Nevinox Welding Wire

Nevinox

Nevatia Steel manufactures welding consumables like MIG filler wire, TIG filler wire, Submerged Arc Wire and Core wire for welding electrodes as per AWS and EN standards.

Grades: 307 Si (18 8 Mn), ER 308, ER 308L, ER 308LSi, ER 309, ER 309L, ER 309LSi, ER 310,ER 316, ER 316L, ER 316LSi, ER 347, ER 430, 430LNb & 409Ti

NEVINOX MIG Wire for GMAW process:

  • Sizes: 0.60 mm – 1.60 mm
  • Surface : Matte or Bright
  • Packing: 1 kg wire (SD 100), 5 kg wire (SD 200), 12.50 / 15 kg wire (SD 300) plastic or BS 300 basket spool

NEVINOX Pail Pacs for Robotic or Automatic welding:

NEVINOX MIG Wire in special PAIL PACS for high productivity GMAW (MIG) process and robotic applications:

  • ROBOTIC APPLICATION :
    Nevinox drum pac with a “No twist pay-off system” suitable for robotic and automatic welding. Our pail pac system is designed for robot equipped facilities and can be easily attached with any wire feeding unit.
  • INCREASE IN PRODUCTIVITY:
    Down time is greatly reduced compared to standard spools resulting in high productivity and cost efficiency.
  • CLEAN CONDITIONS:
    No contamination from the shop environment
  • LOW SPACE REQUIREMENT :
    The drum diameter is only 510 mm.
  • QUICK SETUP:
    Adapt quick and easily to any conventional feeder.
  • UNINTERRUPTED FEEDING :
    The wires are packed in layers within the drum resulting in uninterrupted feeding.
  • WASTAGE CONTROL:
    Cast and helix is adjusted in such a way in our drum pac that reduces the wastage caused by arc wandering.

NEVINOX TIG Wire for GTAW process:

  • Sizes: 1.20 mm – 6.00 mm
  • Surface : Bright
  • Length: 36”, 500 mm or 1000 mm ± 1.00 mm
  • Packing: In plastic or fibre tubes of 5 kg or 10 lbs.

NEVINOX SAW Wire for SMAW process:

  • Sizes: 1.60 mm – 5.00 mm
  • Surface : Matte or Bright
  • Packing: 25 kgs. or 60 lbs. layer wound coils with core or H 400 plastic spools or K 415 metal wire baskets

Stainless Steel Core Wire for MMAW Electrodes:

  • Sizes: 1.60 mm – 5.00 mm
  • Supplied in either Coil form or cut-length as required.